What is India Semiconductor Mission 2.0?

ISM 2.0 is the second phase of India's national semiconductor strategy, announced in the Union Budget 2026-27 with a Rs. 1,000 crore allocation. It focuses on producing semiconductor equipment and materials domestically, designing full-stack Indian chip IP, and building a skilled workforce through industry-led research and training centres.

Which semiconductor plants in India have reached commercial production?

Micron and Kaynes Technology have both entered commercial production, according to Union Minister Ashwini Vaishnaw as reported by ETManufacturing. Kaynes, which began pilot production earlier, made the transition to commercial operations first.

Why is India focusing on chip design and equipment rather than building more fabs?

Building more fabs without a domestic equipment and design base means the fabs themselves remain dependent on foreign-controlled supply chains. ISM 2.0 targets the layers beneath the fab, including process equipment, materials, and IP, to reduce that dependency and capture more domestic value from India's projected $100-110 billion semiconductor market by 2030.

How many semiconductor projects were approved under ISM 1.0?

As of December 2025, 10 ISM projects worth Rs. 1.60 lakh crore were approved across six states, according to the PIB's official ISM 2.0 briefing document.

India Semiconductor Mission

India's Semicon 2.0 Isn't Building More Fabs. It's Building the Industry Behind the Fabs.

With commercial production underway at Micron and Kaynes, India's semiconductor policy is making a deliberate shift toward the harder problem: owning the supply chain that feeds the fabs.

Ohm My GodJun 12, 20265 min read

Key Takeaways

ISM 2.0 deliberately shifts investment from fab construction to domestic equipment, materials, and chip design IP, targeting the supply chain layers that fabs depend on.
Micron and Kaynes Technology have both entered commercial production, marking concrete execution progress under the first phase of India's Semiconductor Mission.
The Rs. 1,000 crore FY 2026-27 allocation emphasises industry-led research and workforce training, because long-term capability lives in talent pipelines, not just factory floors.

Ten approved projects worth Rs. 1.60 lakh crore, spread across six states. Two facilities already in commercial production. A Rs. 1,000 crore budget allocation for a new policy phase announced in the Union Budget 2026-27. By any measure, India's Semiconductor Mission has cleared the credibility threshold that most observers doubted it would reach. But here is the thing that never makes the keynote highlights: the government isn't celebrating by announcing more fabs. It's pivoting to the infrastructure behind the fabs, and that choice tells you more about strategic maturity than any ribbon-cutting ceremony ever could. ## What Phase One Actually Built The first phase of India's Semiconductor Mission was fundamentally about proving the concept. According to the Press Information Bureau's official ISM 2.0 briefing, 10 ISM projects worth Rs. 1.60 lakh crore were approved across six states as of December 2025. That is serious capital commitment spread across a serious geographic footprint. The PIB document confirms that the new phase builds on this foundation by targeting the full-stack value chain, not just adding more fabrication capacity. Two facilities have crossed the line from pilot into commercial production. ETManufacturing reports that Union Minister Ashwini Vaishnaw confirmed both Micron and Kaynes Technology are now in commercial manufacturing. Global SMT's reporting on Micron's facility adds detail to that milestone, noting the historic significance of the company's first semiconductor facility on Indian soil reaching production status. Kaynes, which had been in pilot production earlier, made the transition to commercial operations first, per reporting on the ministerial announcement. These aren't paper launches or announced-but-not-shipping milestones. Chips are moving. ## The Pivot That Doesn't Get Explained Here is the counterintuitive part of Semicon 2.0, and it is worth spending a minute on because industrial policy rarely makes this move so explicitly. Most countries in their early semiconductor push keep stacking fabs, because fabs are visible and fabs make chips you can hold up at a press conference. What India is choosing to prioritize instead, according to the PIB's official ISM 2.0 briefing, is producing semiconductor equipment and materials domestically, designing full-stack Indian semiconductor intellectual property, and fortifying both domestic and global supply chains. Think about what that means in hardware terms. A fab is a consumer of equipment, process chemicals, and design tools. If every lithography system, every deposition tool, every process chemical, and every EDA license still comes from outside the country, then the fab is a final assembly point in a foreign-controlled supply chain. You haven't built a semiconductor industry. You've built a very expensive dependency. ISM 2.0, as framed in the PIB briefing, is the policy recognizing exactly that gap and choosing to address it directly. ## Why Design and Equipment Are the Harder Problems Building a fab is a procurement and construction challenge. Enormously expensive and logistically complex, yes, but it follows a known playbook: acquire land, source equipment, staff up, begin production. Building a domestic equipment industry or a genuine chip design ecosystem is a different category of problem entirely. It requires decades of accumulated engineering knowledge, patent portfolios, tool chains, and the kind of talent pipeline that doesn't exist until you build the universities and research centres that produce it. The ISM 2.0 briefing from the PIB places strong emphasis on industry-led research and training centres specifically to address this. The policy frames workforce development not as a side initiative but as a core deliverable, because without engineers who can design chips and build process equipment domestically, every other investment in the stack is just shipping money abroad in a different direction. India's semiconductor market is projected to reach $100 to $110 billion by 2030, according to the PIB's ISM 2.0 document. Capturing meaningful domestic value from that figure requires owning more of the stack than assembly and packaging. The Institute of Geoeconomics has noted in its analysis of India's semiconductor position that the geopolitics of semiconductors is defined not by who manufactures the most chips, but by who controls the critical layers of the supply chain. ISM 2.0 reads as a direct policy response to exactly that framing. India's World similarly observes that the COVID-19 pandemic exposed deep strategic vulnerability in concentrated semiconductor supply chains, pushing chips from an industrial concern to a central pillar of economic security. The Semicon 2.0 pivot is a direct answer to that lesson. ## What This Means If You're Learning Hardware or Industrial Policy For anyone studying electronics engineering, embedded systems, or industrial policy, the ISM 2.0 architecture is a genuine case study in systems thinking applied at national scale. The decision to invest in equipment manufacturing and full-stack IP design rather than simply greenfield fab capacity is the same logic that applies to any complex engineering system: if you don't understand and control the layers beneath your product, you don't control your product. You're just an integrator. Watch the research and training centre announcements that flow from the Rs. 1,000 crore FY 2026-27 allocation. That is where the long-term capability actually gets built, quietly, in labs and curricula rather than in groundbreaking ceremonies. The facilities at Micron and Kaynes are proof that India can execute on fab construction. Semicon 2.0 is the bet that India can build the industry that makes fabs possible from the inside out. That is a harder bet, a longer timeline, and, if it works, a fundamentally more durable position. ## Sources - Semcon 2.0 to focus on chip design, manufacturing equipment and materials ecosystem: Ashwini Vaishnaw, ETManufacturing(opens in new tab)

India's Semicon 2.0 Isn't Building More Fabs. It's Building the Industry Behind the Fabs.

Key Takeaways

Sources

Related articles